Happymodel Cine8 DIY 85mm 3S Crazybee F4 V3.1 12A ESC 2 Inch Brushless CineWhoop FPV Racing Drone BNF w/ 5.8G 40CH 400mW VTX Caddx ANT 1200TVL Camera - Compatible Frsky Receiver
Notice:
It is DIY FPV Racing Drone.
You need assemble all parts by yourself.
Introduction:
This Kit is very easy to build , no solder work any more, just assemble then plug and play .
Very cheap but equipped with high-performance and stable components.
The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision.
Every one could enjoy the fun of building their own FPV Cinewhoop.
Specification:
Brand Name: Happymodel
Model: Cine8
Item Name: DIY 85mm F4 3S Brushless CineWhoop FPV Racing Drone BNF
Wheelbase: 85mm
Size: 145x140x23mm
Weight: 73g (without battery)
Weight: 99g (with Insta360, NOT Included in package)
EX1202.5 8000KV Motor | Model: EX1202.5 Item Name: 1202.5 8000KV 2-3 Brushless Motor No.of Cells: 2-3S Lipo
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:?1.5mm
Motor Dimension(Dia.*Len): ?14x14.5mm
Weight: 4.4g
|
Gemfan D51 2020 4-Blade Propeller
| Material:PC Weight:0.91g Pitch:2in Props Dia:50.3mm Center Thickness:4.5mm Center Hole Dia:1.5mm 3 holes |
CRAZYBEE F4 V3.1 Flight Controller | Frsky SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (External Speki+ RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board Size: 28.5x28.5mm
Power Supply: 2-4S Battery input (DC 7V-17V)
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC |
| Onboard 12A 4in1 ESC | MCU Upgraded to EFM8BB21
Power Supply: 2-4S LiPo/LiPo HV (7v/17v)
Con. Current: 12A Burst Current: 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT600
|
Onboard Frsky SPI D8 Receiver Version | CC2500 Hardware Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol Channels: 8ch
Failsafe support Diversity 2.4G receiver system
No ground interference: above 300meter |
External Flysky Fli14+ Receiver | Channel: 14
Protocol: AFHDS-2A
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 50mm (single antenna)
Input Power: 4.0-6.5V DC
Weight: Only 1g
Size: 19.5mm*12mm*5mm
Color: Black
Signal Output: IBUS
RSSI Output: Channel14
No ground interference: >500m |
External DSMX/2 Receiver | Dimension: 20x12.4x5mm
Support protocol: DSM2/DSMX
Output Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider)
Antenna connector: I-PEX MHF3
Antenna length: 70mm
Input voltage: 3.6v~13v
Input current: 100ma
Channels: Max12ch(usually channel 12 is used for RSSI) |
External TBS CRSF Nano Receiver | Original TBS CROSSFIRE Receiver, CRSF Protocol, Official TBS transmitter compatible |
5.8G 40CH 400mw VTX | Output power: 25mw~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band SmartAudio ready |
Caddx ANT 1200TVL Camera | Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20?~+60? Weight: 2g (N.W.)
|
| Lipo Battery | Tattu 3S 11.4V 450mAh Lipo Battery
|
Features:
- No Solder work need and easy to build
- Very reliable and resistant to drops
- Stable and smooth flying
- Insta360 fixed mount ready ( insta360 camera not included)
- Smooth and powerful
Package Included:
1x Cine8 85mm Frame
1x Optional Receiver
4x EX1202.5 8000KV Motor
2x Gemfan D51 2020 4-Blade Propeller CW
2x Gemfan D51 2020 4-Blade Propeller CCW
1x Caddx ANT 1200TVL Camera
1x 5.8G 400mW VTX
1x TypeC USB Adapter
1x Tattu 3S 11.4V 450mAh Lipo Battery
