Summary
The co-branded GEPRC Fettec G4 Alpha GF50A stack by GEPRC and FETTEC has been released. The FC features a G473 main controller, built-in FETTEC Alpha firmware, and S2M or Dshot2400 high-speed protocol with GF50A ESC to achieve exceptional stability and lightning-fast responsiveness. Additionally, the powerful FETTEC closed-source firmware and feature-rich software will elevate your FPV flight experience to new levels.
Feature
- The flight controller uses FETTEC Alpha firmware, the ESC uses FETTEC firmware, and supports high-speed protocols such as S2M and Dshot2400.
- All flight control function interfaces support SH1.0 cable connection, which makes assembly without soldering wires more convenient.
- High-definition analog two-in-one socket, supporting DJI digital image transmission and analog image transmission
- The FC features high robustness to handle challenging situations, such as bent propellers caused by crashes, under harsh flight conditions.
Specifications
Model?GEPRC Fettec G4 Alpha
- MCU?STM32G473CEU6
- IMU?llM 42602
- Firmware?FETTEC ALPHA
- OSD?FETTEC OSD
- External buzzer?YES
- External LED ?YES
- USB Interface?TYPE-C
- BEC Output?9v@2A MAX 2.5A 5V@2A MAX 2.5A
- Weight?6.6g
Model?GEPRC Fettec GF50A 4IN1 DShot2400 ESC
- MCU: STM32G071
- Continuous current: 50A
- Peak current: 55A
- Input: 2~6S (LIPO Battery)
- Protocol: S2M+OW, S2M, Dshot300-2400
- Galvanometer: YES
- Firmware: FETTEC
- Dimension: 32x32mm Board
- Installation hole position: 30.5mmx30.5mm M4
- Weight: 13g
Includes
1 x GEPRC Fettec GF50A 4IN1 DShot2400 ESC
1 x GEPRC Fettec G4 Alpha FC
2 x SH1.0-4Pin 100mm silicone wire
1 x SH1.0-6P to SH1.0-7Pin silicone cable 60mm
1 x SH1.0 8Pin 30mm silicone cable
1 x SH1.0 7pin to 6pin 80MM silicone cable
1 x XT60 power cable 110MM
1 x 35v 1000uf capacitor
4 x Hexagon socket screw M3*24
4 x Transparent color M3 nylon nut
10 x M3*8 damping ball
1 x Product manual
![](https://geprc.com/wp-content/uploads/2024/04/12-2.jpg)